Friday, March 31, 2017

Content List of Videos (Autodesk Inventor)

Sr. No.

List of Video Tutorials (Autodesk Inventor)

Page No.

01

Allen Screwdriver (Autodesk Inventor 2010)

1

02

Anvil (Autodesk Inventor 2010)

3

03

Ashtray (Autodesk Inventor 2013)

5

04

Bevel Gear-Drive Constraint-Autodesk Inventor 2012 (with caption and audio narration)

7

05

Bevel Gear-Dynamic Simulation-Autodesk Inventor 2012 (with caption and audio narration)

8

06

Bolt and Nut with Realistic Modelled Thread (Autodesk Inventor 2013)

9

07

Creating Unified and American screw internal thread profile (Autodesk Inventor 2012)

11

08

Bolt-Nut-Dynamic Simulation-Autodesk Inventor 2012 (with caption and audio narration)

13

09

Bottle-Plastic (Autodesk Inventor 2015)

15

10

Box (mini size)-Inventor Studio-Autodesk Inventor 2013 (with caption and audio narration)

16

11

Box (mini size) - Autodesk Inventor 2010

18

12

Bucket (Autodesk Inventor 2013)

20

13

'Bulb Shade' Autodesk Inventor 2012 Tutorial (with caption and audio narration)

22

14

Burner (Autodesk Inventor 2010)

24

15

Calculator (Cabinet) - Autodesk Inventor 2012

27

16

Ceiling Hook-Autodesk Inventor 2013 (with caption and audio narration)

29

17

Chain-Inventor Studio-Autodesk Inventor 2012 (with caption and audio narration)

30

18

Chisel (Autodesk Inventor 2010)

31

19

Circular Plate (Autodesk Inventor 2010)

33

20

Clamp for Girder (Autodesk Inventor 2018 Tutorial)

35

21

Comb (Autodesk Inventor 2010)

37

22

Combination Pliers-Inventor Studio-Autodesk Inventor 2012 (with caption and audio narration)

38

23

Combination Pliers (Autodesk Inventor 2010)

41

24

Computer Mouse (Autodesk Inventor 2012)

44

25

Cot-Wooden (Autodesk Inventor 2012)

46

26-A

Door (Panel with Frame) Volume-1 (Autodesk Inventor 2010)

48

26-B

Door (Panel with Frame) Volume-2 (Autodesk Inventor 2010)

50

27

Door (Panel with Frame) - Drive Constraint (Autodesk Inventor 2010)

52

28

Double Sided Half V-Groove Weld Joint-Autodesk Inventor 2013 (with caption and audio narration)

54

29

Drill Machine (Video Tutorial) Autodesk Inventor 2010

55

30

Drill Machine-Dynamic Simulation-Autodesk Inventor 2012 (with caption and audio narration)

57

Sr. No.

List of Video Tutorials (Autodesk Inventor)

Page No.

31

Pipe Fittings (Video Tutorial) Autodesk Inventor 2013

59

32

Ellipsoid (Autodesk Inventor 2012)

60

33-A

Emergency Light (Cabinet) Volume-1 (Autodesk Inventor 2012)

61

33-B

Emergency Light (Cabinet) Volume-2 (Autodesk Inventor 2012)

63

34

Eye Wash Cup (Autodesk Inventor 2010)

65

35

Flower-pot (Autodesk Inventor 2010)

66

36

Fluorescent Bulb (Autodesk Inventor 2010)

67

37

Gate Valve (Autodesk Inventor 2012)

70

38

Gimlet (Autodesk Inventor 2016)

72

39

Glass (Autodesk Inventor 2010)

74

40

Grating for Gas Oven (Autodesk Inventor 2010)

76

41

Hacksaw (Autodesk Inventor 2012)

78

42

Hammer (Autodesk Inventor 2010)

80

43

Hand Vise (Autodesk Inventor 2012)

84

44

Handle of Screw Driver (Autodesk Inventor 2010)

86

45

Hardware Fittings (Autodesk Inventor 2010)

88

46

Helical Gear (Internal)-Dynamic Simulation-Autodesk Inventor 2012 (with caption and audio narration)

91

47

Helical Gear-Drive Constraint-Autodesk Inventor 2012 (with caption and audio narration)

92

48

Helical Gear-Dynamic Simulation-Autodesk Inventor 2012 (with caption and audio narration)

93

49

Hinge-Autodesk Inventor 2012 (with caption and audio narration)

94

50

Hook-Gate Fixture (Autodesk Inventor 2013)

96

51

Hyperboloid (Autodesk Inventor 2012)

98

52

Jar-Plastic (Autodesk Inventor 2012)

99

53

Latch for Shelf (Almirah) Autodesk Inventor 2010

101

54

Laundry Press (Autodesk Inventor 2012)

102

55

LED Lamp (Autodesk Inventor 2012)ll

104

56

Lid of Frying Pan (Autodesk Inventor 2010)

105

57

Liquid Petroleum Gas Regulator (Autodesk Inventor 2012)

107

58

Magnetized Pin Box (Autodesk Inventor 2010)

109

59

Match Box (Autodesk Inventor 2012)

111

60

Measuring Scale (Autodesk Inventor 2010)

113

61

Mesh of Table Fan (Autodesk Inventor 2010)

115

62-A

Mixer (Cabinet) - Volume-1 (Autodesk Inventor 2012)

118

Sr. No.

List of Video Tutorials (Autodesk Inventor)

Page No.

62-B

Mixer (Cabinet) - Volume-2 (Autodesk Inventor 2012)

120

63

Mug-Plastic (Autodesk Inventor 2010)

122

64

Mug-metallic (Autodesk Inventor 2013)

124

65

……………………………………………………………………………………………...

125

66

Nose Pliers-Inventor Studio-Autodesk Inventor 2012 (with caption and audio narration)

126

67

Nose Pliers - (Autodesk Inventor 2010)

128

68

Nozzle (Autodesk Inventor 2010)

130

69

Paraboloid (Autodesk Inventor 2012)

132

70

Peeler (Autodesk Inventor 2016)

133

71

Pen Stand (Autodesk Inventor 2010)

135

72

Pencil (Autodesk Inventor 2010)

136

73

Pipe Collar (Autodesk Inventor 2010)

137

74

Pipe Wrench (Video Tutorial) Autodesk Inventor 2010

140

75

Pipe Wrench-Drive Constraint-Autodesk Inventor 2012 (with caption and audio narration)

142

76

Plug-Top (2-Pin) - Autodesk Inventor 2012

144

77

Plug-Top (3-Pin) - Autodesk Inventor 2012

146

78

Pressure Cooker (Autodesk Inventor 2012)

149

79

Rack and Pinion-Drive Constraint-Autodesk Inventor 2012 (with caption and audio narration)

151

80

Rectangular Tin Container (Autodesk Inventor 2013)

152

81

Roller Chain-Dynamic Simulation-Autodesk Inventor 2012 (with caption and audio narration)

154

82

Round Bowl (Autodesk Inventor 2010)

155

83

Round Tin Container (Autodesk Inventor 2013)

157

84

Screw Driver (Autodesk Inventor 2010)

158

85

Shaving Razor (Autodesk Inventor 2010)

160

86

Soap Case (Autodesk Inventor 2010)

163

87

Socket (Multi Pin) - Autodesk Inventor 2012

165

88

……………………………………………………………………………………………...

168

89

Spectacle Case (Autodesk Inventor 2012)

169

90

Stool (Autodesk Inventor 2010)

171

91

Strainer (Autodesk Inventor 2010)

173

92

Switch (Cabinet) - Autodesk Inventor 2012

175

93

Synchronous Belt-Dynamic Simulation-Autodesk Inventor 2012 (with caption and audio narration)

177

94

Synchronous Belt-Inventor Studio-Autodesk Inventor 2012 (with caption and audio narration)

178

Sr. No.

List of Video Tutorials (Autodesk Inventor)

Page No.

95

Table Plastic (Autodesk Inventor 2010)

179

96

Table-Steel Frame By Frame Generator (Autodesk Inventor 2010)

180

97

……………………………………………………………………………………………...

182

98

……………………………………………………………………………………………...

183

99

Tiffin Box (Autodesk Inventor 2010)

184

100

Top Cover of Stabilizer (Autodesk Inventor 2010)

186

101

Tray-Autodesk Inventor 2013 (with caption and audio narration)

188

102

Tub-Rectangular (Autodesk Inventor 2010)

190

103

V-Belt-Dynamic Simulation-Autodesk Inventor 2012 (with caption and audio narration)

191

104

Ventilator-Steel Frame (Autodesk Inventor 2015)

192

105

Vise (Video Tutorial) Autodesk Inventor 2010

194

106

Vise-Dynamic Simulation-Autodesk Inventor 2012 (with caption and audio narration)

196

107

Wood Screw (Autodesk Inventor 2015)

198

108

Worm Gear-Drive Constraint-Autodesk Inventor 2012 (with caption and audio narration)

200

109

Worm Gear-Dynamic Simulation-Autodesk Inventor 2012 (with caption and audio narration)

201

110

Spherical Surface (Autodesk Inventor 2012)

202

111

Engine MKII (Autodesk Inventor 2016)

203

112

Metal Container (Video Tutorial with Caption) Autodesk Inventor 2016

204

113

Oil Pan (Autodesk Inventor 2012)

205

114

2 Bolt Self Aligning Plain Bearing (Autodesk Inventor 2012)

206

115

4 Bolt Self Aligning PLAIN Bearings (Autodesk Inventor 2012)

207

116

Bearing Locknut-NE (Autodesk Inventor 2012)

208

117

Bearing Lock nut Washer (Autodesk Inventor 2012)

209

118

Twist Drill (Autodesk Inventor 2012)

210

119

Swing Bar 3-8 Drive (Autodesk Inventor 2012)

211

120

Socket 3-8 Shallow 12pt (Autodesk Inventor 2012)

212

121

Wrench (Autodesk Inventor 2012)

213

122

USB Extender (Autodesk Inventor 2012)

214

123

Scissor (Autodesk Inventor 2012)

216

124

Casing-Plastic (Autodesk Inventor 2012)

218

125

Creation of Exploded View of a Model-Autodesk Inventor 2013 (with caption and audio narration)

219

126

Parabola from 2D Equation Curve (Autodesk Inventor 2013)

220

127

Hyperbola from 2D Equation Curve (Autodesk Inventor 2013)

221

Sr. No.

List of Video Tutorials (Autodesk Inventor)

Page No.

128

Ellipse from 2D Equation Curve (Autodesk Inventor 2013)

222

129

Deck (Architectural Model) Autodesk Inventor 2012

223

130

Jar-Glass (Autodesk Inventor 2012)

224

131

Spoon (Autodesk Inventor 2012)

226

132

Almirah (Shelf Mini Size) - Autodesk Inventor 2012

227

133

Pulley with round groove (Autodesk Inventor 2015)

228

134

Pulley with V-groove (Autodesk Inventor 2015)

230

135

Square Bend Tube (Autodesk Inventor 2012)

232

136

Grater (Autodesk Inventor 2012)

233

137

Modelling and Simulating a Cam and Follower Assembly (Autodesk Inventor 2013)

234

138

Simulate a Cam and Valve Assembly (Autodesk Inventor 2012)

235

139

Reciprocating Saw Part 1 - Dynamic Simulation (Autodesk Inventor 2012)

236

140

Reciprocating Saw Part 2 - Dynamic Simulation (Autodesk Inventor 2012)

237

141

Windshield Wiper - FEA Using Motion Loads (Autodesk Inventor 2012)

238

142

90 Degree M16 Bolt Removal Tool Design (Autodesk Inventor 2012)

239

143

Application of Split Tool-Autodesk Inventor 2012 (with caption and audio narration)

240

144

Application of browser bar in Autodesk Inventor (with caption and audio narration)

241

145

Application of 3D sketch with loft feature-Autodesk Inventor 2012 (with caption and audio narration)

242

146

Rotate and Place components in an Assembly-Autodesk Inventor 2013 (with caption and audio narration)

243

147

Creating a component in an assembly-Autodesk Inventor 2013 (with caption and audio narration)

244

148

Creating hole on a curve surface-Autodesk Inventor 2013 (with caption and audio narration)

245

149

Creating wires in Mesh of Table Fan-Autodesk Inventor 2013 (with caption and audio narration)

246

150

Application of Extrude Feature-Autodesk Inventor 2013 (with caption and audio narration)

247

151

Fixture Block (Video Tutorial) Autodesk Inventor 2012

248

152

Mount Bracket (Video Tutorial) Autodesk Inventor 2012

249

153

Valve Lifter (Video Tutorial) Autodesk Inventor 2012

250

154

Housing Fixture (Video Tutorial) Autodesk Inventor 2012

251

155

Hopper Flange (Video Tutorial) Autodesk Inventor 2012

252

156

Gear Pump Body (Video Tutorial) Autodesk Inventor 2012

253

157

Alignment Bracket (Video Tutorial) Autodesk Inventor 2012

254

158

Dovetail Stop Guide (Video Tutorial) Autodesk Inventor 2012

255

159

Anchor Slide (Video Tutorial) Autodesk Inventor 2012

256

160

Drill Bit (Video Tutorial) Autodesk Inventor 2012

257

Sr. No.

List of Video Tutorials (Autodesk Inventor)

Page No.

161

Drive Insert (Video Tutorial) Autodesk Inventor 2012

258

162

Ratchet Wheel (Video Tutorial) Autodesk Inventor 2012

259

163

Truss Flange (Video Tutorial) Autodesk Inventor 2012

260

164

Flanged 90 Elbow (Video Tutorial) Autodesk Inventor 2012

261

165

Alignment Catch (Video Tutorial) Autodesk Inventor 2012

262

166

Mini Crank Case (Video Tutorial) Autodesk Inventor 2012

263

167

Pinch Fit Cap (Video Tutorial) Autodesk Inventor 2012

264

168

Slip Nut Insert-03 (Video Tutorial) Autodesk Inventor 2012

265

169

Field Glass Fun (Video Tutorial) Autodesk Inventor 2012

266

170

Pivot Arm (Video Tutorial) Autodesk Inventor 2016

267

171

Fly Wheel (Video Tutorial) Autodesk Inventor 2012

268

172

Elbow Piston (Video Tutorial) Autodesk Inventor 2012

269

173

Support Base (Video Tutorial) Autodesk Inventor 2012

270

174

Cylinder (Video Tutorial) Autodesk Inventor 2012

271

175

Inspection Cover for Sewage System (Autodesk Inventor 2012)

272

176

Bibcock (Autodesk Inventor 2013)

274

177

Mounting Bracket (Autodesk Inventor 2012)

275

178

Create Part from Sketch (Autodesk Inventor 2012)

276

179

Ashtray (New Design) - Autodesk Inventor 2012

277

180

Helical Gear (Internal)-Drive Constrain-Autodesk Inventor 2012 (with caption and audio narration)

278

181

Rack and Pinion-Dynamic Simulation-Autodesk Inventor 2012 (with caption and audio narration)

279

182

Pipe Wrench-Dynamic Simulation-Autodesk Inventor 2012 (with caption and audio narration)

280

183

Cam and Follower-Dynamic Simulation-Autodesk Inventor 2013 (with caption and audio narration)

281

184

Knob of Switch-Autodesk Inventor 2013 (with caption and audio narration)

282

185

Can (Autodesk Inventor 2013)

284

186

Tub-Rectangular through Sheet Metal-Autodesk Inventor 2013 (with caption and audio narration)

286

187

Latch created through Sheet Metal-Autodesk Inventor 2013 (with caption and audio narration)

287

188

Circular Tub through Sheet Metal-Autodesk Inventor 2013 (with caption and audio narration)

288

189

Chassis for Automatic Voltage Regulator by Sheet Metal (Autodesk Inventor 2013)

289

190

Chassis for Constant Voltage Transformer by Sheet Metal (Autodesk Inventor 2013)

291

191

Application of ‘Extrude’ tool (Join operation) Autodesk Inventor 2013 (with caption and audio narration)

292

192

Application of ‘Text’ tool and ‘Emboss’ tool-Autodesk Inventor 2013 (with caption and audio narration)

293

Sr. No.

List of Video Tutorials (Autodesk Inventor)

Page No.

193

Creating Tooth of Hacksaw Blade-Autodesk Inventor 2013 (with caption and audio narration)

294

194

Creating a new Part on the curve surface in Assembly-Autodesk Inventor 2013 (with caption and audio)

295

195

Application of ‘Loft’ tool Ex.1-Autodesk Inventor 2013 (with caption and audio narration)

296

196

Application of ‘Sweep’ tool and ‘Shell’ tool-Autodesk Inventor 2013 (with caption and audio narration)

297

197

Application of ‘Circular Pattern’ tool-Autodesk Inventor 2013 (with caption and audio narration)

298

198

Application of ‘Sweep' tool and ‘Circular Pattern’ tool-Autodesk Inventor 2013 (with caption and audio)

299

199

Application of ‘Contour Flange’ & ‘Contour Roll’ tool-Autodesk Inventor 2013 (with caption and audio)

300

200

Application of ‘Loft’ tool Ex.2--Autodesk Inventor 2013 (with caption and audio narration)

301

201

Creating a Notch of Mug-Autodesk Inventor 2013 (with caption and audio narration)

302

202

Punch Tool-Autodesk Inventor 2013 (with caption and audio narration)

303

203

Face tool and Flange tool-Autodesk Inventor 2013 (with caption and audio narration)

304

204

Hem Tool-Autodesk Inventor 2013 (with caption and audio narration)

305

205

Thread Cutting in Bolt & Nut-Autodesk Inventor 2013 (with caption and audio narration)

306

206

Photo Frame (Design-1)--Autodesk Inventor 2013 (with caption and audio narration)

308

207

Photo Frame (Design-2)--Autodesk Inventor 2013 (with caption and audio narration)

310

208

Door (Panel with Frame) modified design--Autodesk Inventor 2013 (with caption)

312

209

Handle of Tack Hammer-Autodesk Inventor 2013 (with caption and audio narration)

314

210

iTwist Drill (Autodesk Inventor 2013)

316

211

Create a Twist Drill as an ‘iPart’ through-Autodesk Inventor 2013 (with caption and audio narration)

317

212

Key of Iron Safe (Autodesk Inventor 2013)

318

213

iWrench (Autodesk Inventor 2013)

319

214

Create a Wrench as an ‘iPart’ through-Autodesk Inventor 2013 (with caption and audio narration)

320

215

Door of Shelf (Autodesk Inventor 2013)

321

216

Allen Screwdriver—Double Ended (Autodesk Inventor 2013)

323

217

Creating Realistic Knurling on the Cylindrical Surface (Autodesk Inventor 2013)

324

218

Controlling parameters of assembly by using ‘Derived Component’ (Autodesk Inventor 2013)

325

219

Wine Bottle (Autodesk Inventor 2013)

326

220

Chain-Inventor Studio (Upgraded Design) - Autodesk Inventor 2013

327

221

Bathroom Stool-Plastic (Autodesk Inventor 2016)

328

222-A

Shelf-Wooden for Food Storage (Volume-1) Autodesk Inventor 2016

330

222-B

Shelf-Wooden for Food Storage (Volume-2) Autodesk Inventor 2016

332

223

Spoon (Autodesk Inventor 2016)

334

Sr. No.

List of Video Tutorials (Autodesk Inventor)

Page No.

224

Ladle (Autodesk Inventor 2016)

336

225

Engine Crank Shaft (Autodesk Inventor 2016)

338

226

Engine Piston -- Autodesk Inventor 2016 Tutorial (with caption and audio narration)

340

227

Engine Connecting Rod (Video Tutorial with Caption) Autodesk Inventor 2016

342

228

Engine Case Rear (Autodesk Inventor 2016)

344

229

Engine Head (Autodesk Inventor 2013)

346

230

Carb (Autodesk Inventor 2016)

348

231

Carb Slide Boot (Autodesk Inventor 2016)

350

232

Tuned Pipe (Autodesk Inventor 2016)

352

233

Tuned Pipe 2 (Autodesk Inventor 2016)

354

234

Flywheel (Autodesk Inventor 2016)

356

235

Carb Zip-Tie (Autodesk Inventor 2016)

358

236

Clutch Nut (Autodesk Inventor 2016)

359

237

Clutch Shoe 2 (Autodesk Inventor 2016)

361

238

Engine Rear Cover (Autodesk Inventor 2016)

362

239

Engine Sleeve Rear (Autodesk Inventor 2016)

364

240

Rear Exhaust Manifold (Autodesk Inventor 2016)

366

241

Carb Intake Nipple (Autodesk Inventor 2016)

368

242

Carb High-speed Needle (Autodesk Inventor 2016)

369

243

………………………………………………………………………………………………………………

371

244

Carb Slide (Autodesk Inventor 2016)

372

245

Clutch Bell (Autodesk Inventor 2016)

373

246

Flywheel Washer (Autodesk Inventor 2016)

375

247

Compression Button (Autodesk Inventor 2016)

376

248

Exhaust Manifold Gasket (Autodesk Inventor 2016)

378

249

Flywheel Taper Collar (Autodesk Inventor 2016)

379

250

Carb Spring (Autodesk Inventor 2016)

380

251

Extension Spring 3.873 (Autodesk Inventor 2016)

381

252

Miscellaneous Components of 'Engine MKII' (Autodesk Inventor 2016)

382

253

Wheel (Autodesk Inventor 2016)

383

254

Tire-2 (Autodesk Inventor 2016)

385

255

Front Lower Arm Brace (Autodesk Inventor 2016)

386

256

Front Hub Carrier L (Autodesk Inventor 2016)

387

Sr. No.

List of Video Tutorials (Autodesk Inventor)

Page No.

257

Hex Drive (Autodesk Inventor 2016)

389

258

E-Clip (Autodesk Inventor 2016)

390

259

Front Side Plate R (Autodesk Inventor 2016)

391

260

Ball End (Autodesk Inventor 2016)

393

261

Front Adjustment Clip (Autodesk Inventor 2016)

394

262

0.1875 Ball stud 0.375 (Autodesk Inventor 2016)

395

263

Front Lower Arm (Autodesk Inventor 2016)

396

264

Front Upper Arm (Autodesk Inventor 2016)

398

265

Front Axel -- Autodesk Inventor 2016 Tutorial (with caption and audio narration)

400

266

Front Hub Bearing (Autodesk Inventor 2016)

402

267

Front Upper Arm Mount (Autodesk Inventor 2016)

403

268

Pillow Ball Retainer (Autodesk Inventor 2016)

405

269

Front Shock Brace (Autodesk Inventor 2016)

406

270

Shock Cartridge (Autodesk Inventor 2016)

408

271

Shock Bushing (Autodesk Inventor 2016)

410

272

Rear Hub Bearing (Autodesk Inventor 2016)

411

273

Suspension_Spring (Autodesk Inventor 2016)

412

274

Piston of Suspension (Autodesk Inventor 2016)

413

275

Shock Spring Adjustment Nut (Autodesk Inventor 2016)

414

276

Spring Cup (Autodesk Inventor 2016)

415

277

Shock Body 1.3 Length (Autodesk Inventor 2016)

417

278

Pillow Ball (Autodesk Inventor 2016)

418

279-A

Miscellaneous Components of 'Suspension' Series-1 (Autodesk Inventor 2016)

419

279-B

Miscellaneous Components of 'Suspension' Series-2 (Autodesk Inventor 2016)

420

280

Suspension (Autodesk Inventor 2016)

421

281

Scissors (Spring Loaded) (Autodesk Inventor 2016)

423

282-A

Stapler (Volume-1) Autodesk Inventor 2016

425

282-B

Stapler (Volume-2) Autodesk Inventor 2016

427

282-C

Stapler (Volume-3) Autodesk Inventor 2016

429

283-A

Suspension Fork (Volume-1) Autodesk Inventor 2016

431

283-B

Suspension Fork (Volume-2) Autodesk Inventor 2016

432

284

AC-Motor (Video Tutorial) Autodesk Inventor 2016

433

285-A

Blower (Volume-1) Autodesk Inventor 2016

435

Sr. No.

List of Video Tutorials (Autodesk Inventor)

Page No.

285-B

Blower (Volume-2) Autodesk Inventor 2016

437

285-C

Blower (Volume-3) Autodesk Inventor 2016

439

286

Tuner (Autodesk Inventor 2016)

441

287-A

Test Station (Volume-1) Autodesk Inventor 2016

443

287-B

Test Station (Volume-2) Autodesk Inventor 2016

445

287-C

Test Station (Volume-3) Autodesk Inventor 2016

447

287-D

Test Station (Volume-4) Autodesk Inventor 2016

449

287-E

Test Station (Volume-5) Autodesk Inventor 2016

451

287-F

Test Station (Volume-6) Autodesk Inventor 2016

453

288

iTwist Drill -- Autodesk Inventor 2013 Tutorial (with caption and audio narration)

454

289

…………………………………………………………………………………………………………………

455

290

…………………………………………………………………………………………………………………….

456

291

Carb Intake Plate -- Autodesk Inventor 2018 Tutorial (with caption and audio narration)

457

292

‘Helical Gear’-Autodesk Inventor 2018 Modelling and Animation Tutorial

458

293

‘Rack & Pinion’ Autodesk Inventor 2018 Modelling and Animation Tutorial

459

294

‘Worm Gear’-Autodesk Inventor 2018 Modelling and Animation Tutorial

460

295

‘Bevel Gear’-Autodesk Inventor 2018 Modelling and Animation Tutorial

461

296

How to write 'Mathematical Equation' in Microsoft Office--Exercise-1 (with caption and audio narration)

462

297

How to write 'Mathematical Equation' in Microsoft Office--Exercise-2 (with caption and audio narration)

463

298

How to write 'Mathematical Equation' in Microsoft Office--Exercise-3 (with caption and audio narration)

464

299

How to write subscript and superscript text in Autodesk Inventor (with caption and audio narration)

465

300

How to change background colour in Autodesk Inventor (with caption and audio narration)

466

301

Change the Default background and Text colour in Windows 8.1 Pro, 64 bit (with caption and audio)

467

302

Change of Background and Text colour on Web Page in Google Chrome

468

303-A

'Computer Table' (Volume-1)--Autodesk Inventor 2018 Tutorial

469

303-B

'Computer Table' (Volume-2)--Autodesk Inventor 2018 Tutorial

471

304

'Stair Case (Double Fold) with Railing'--Autodesk Inventor 2018 Tutorial

473

305-A

Modelling of 'Screw Gauge' with Dynamic Simulation (Volume-1) Autodesk Inventor 2018 Tutorial

476

305-B

 Modelling of 'Screw Gauge' with Dynamic Simulation (Volume-2) Autodesk Inventor 2018 Tutorial

478

306

Generation of Conic Section Ellipse (Autodesk Inventor 2018 Tutorial)

480

307

Generation of Conic Section Parabola (Autodesk Inventor 2018 Tutorial)

481

308

Generation of Conic Section Hyperbola (Autodesk Inventor 2018 Tutorial)

482

Sr. No.

List of Video Tutorials (Autodesk Inventor)

Page No.

309

Door Security Bar (Autodesk Inventor 2018 Tutorial)

483

310

Door Stopper (Autodesk Inventor 2018 Tutorial)

485

311-A

Ladder-foldable (Volume-1)-Autodesk Inventor 2018 Tutorial

487

311-B

Ladder-foldable (Volume-2)-Autodesk Inventor 2018 Tutorial

489

311-C

Ladder-foldable (Volume-3)-Autodesk Inventor 2018 Tutorial

491

312-A

Basket-Wire Knitted (Volume-1) Autodesk Inventor 2018 Tutorial

493

312-B

Basket-Wire Knitted (Volume-2) Autodesk Inventor 2018 Tutorial

494

313

Top Tool-tray (Autodesk Inventor 2018 Tutorial)

495

314

Pincer for gripping Round Flange Pot (Autodesk Inventor 2018 Tutorial)

497

315

Oil Lamp Stand (Autodesk Inventor 2018 Tutorial)

498

316

Propeller (Autodesk Inventor 2018 Tutorial)

499

317-A.

Vernier Caliper (Volume-1) Autodesk Inventor 2018 Tutorial

501

317-B.

Vernier Caliper (Volume-2) Autodesk Inventor 2018 Tutorial

503

317-C.

Vernier Caliper (Volume-3) Autodesk Inventor 2018 Tutorial

505

318

Ball Bearing (Autodesk Inventor 2018 Tutorial)

507

319-A.

Chair-Steel (Volume-1) Autodesk Inventor 2018 Tutorial

509

319-B.

Chair-Steel (Volume-2) Autodesk Inventor 2018 Tutorial

511

320-A.

Chair-Steel with Arm (Volume-1) Autodesk Inventor 2018 Tutorial

513

320-B.

Chair-Steel with Arm (Volume-2) Autodesk Inventor 2018 Tutorial

515

321

Arbor Press (Autodesk Inventor 2018 Tutorial)

517

322

Shock Absorber (Autodesk Inventor 2016 Tutorial)

519

323

Drawing Sheet Tutorial (Tire-2) (Autodesk Inventor 2018)

521

324

Curtain Hanger Fitting through Sheet Metal (Autodesk Inventor 2018 Tutorial)

523

325

Mortar & Pestle (Autodesk Inventor 2018 Tutorial)

524

326

Connecting Rod & Connecting Rod Cap Assembly (Autodesk Inventor 2018 Tutorial)

526

327

Piston Assembly (Autodesk Inventor 2018 Tutorial)

528

328

Crankshaft Assembly (Autodesk Inventor 2018 Tutorial)

530

329

Four Cylinder Engine Assembly (Autodesk Inventor 2018 Tutorial)

532

330

Autodesk Inventor 2018 Surface Modelling Tutorial _Design Steel Spoon

534

331

BMW_RIM in Autodesk Inventor 2018 Tutorial

536

332

Metallic Frame fitted along the Edges of Acrylic Sheet Autodesk Inventor 2018 Tutorial

538

333

Inner & Outer Rectangular Frames of Folding Cot (Autodesk Inventor 2018 Tutorial)

539

334

Folding Cot made by Hollow Rectangular Pipe (Autodesk Inventor 2018 Tutorial)

540

Sr. No.

List of Video Tutorials (Autodesk Inventor)

Page No

335

3D Pipe with Flange (Autodesk Inventor 2018 Tutorial)

542

336

Chuck Jaw (Autodesk Inventor 2018 Tutorial)

543

337

Pneumatic Motor Assembly (Autodesk Inventor 2018 Tutorial)

544

338

Basic Part Modelling (Autodesk Inventor 2018 Tutorial)

546

339

Basic Part Modelling_Ex.1 (Autodesk Inventor 2018 Tutorial)

547

340-A

Folding Cot using Rectangular bar—Volume-1 (Autodesk Inventor 2018 Tutorial)

548

340-B

Folding Cot using Rectangular bar—Volume-2 (Autodesk Inventor 2018 Tutorial)

550

341

Brunch Table with Rectangular Steel Frame (Autodesk Inventor 2018 Tutorial)

552

342

Engine Block (Autodesk Inventor 2018 Tutorial)

554

343

Radial Engine Assembly (Autodesk Inventor 2018 Tutorial)

556

344

Mechanical Bench Vise (Autodesk Inventor 2018 Tutorial)

557

345

Mechanical Bench Vise Animation through Dynamic Simulation

559

346

Roots Blower Assembly (Autodesk Inventor 2018 Tutorial)

560

347

Belt Roller Support Assembly (Autodesk Inventor 2018 Tutorial)

562

348-A

Car Engine (2Turbo V6) Advanced Assembly Designing Volume_1 (Autodesk Inventor 2018 Tutorial)

564

348-B

Car Engine (2Turbo V6) Advanced Assembly Designing Volume_2 (Autodesk Inventor 2018 Tutorial)

566

 

47 comments :

  1. excellent blogspot, shared it on facebook. thank you very much, successessssss

    ReplyDelete
  2. I think u'd recieve a lot more attention if u provide the viewers a chance to rate ur videos. Since uve uploaded a huge amount of tutorials here, visitors will check out highly rated ones if they're just randomly skimming through ur page.. U cud also try adding a 'times viewed' tab for each video.
    As for the fact ur looking for training, u might want to check out ProE and the like.. Industries (in India mainly) use ProE n Catia.

    -cibinjoseph@yahoo.co.in

    ReplyDelete
  3. My name is Donald, a friend introduced me to Autodesk inventor early this year, and since then my interest and love for the software has exponentially increased. While trying to learn about the software online, i came across your blog and have been practicing with your model drawing. Honestly, your works have inspired me and i hope to keep in touch with you. my email is donald.opara@yahoo.com.

    ReplyDelete
  4. Hi Nivesh,

    This is really excellent blog on 3-D Parametric Solid. Seriously your works have inspired me. When i was finding out about inventor, i came across your blog. I really enjoyed at the time of reading. I just like your way of describing on this topic. Thanks for posting. If you are looking for online solidwork training then contact:
    info@video-tutorials.net
    http://www.video-tutorials.net/vtnet/

    ReplyDelete
  5. I just watched your YouTube video of the drill bit and it was excellent! I came here and will be watching many more. I am new to this software and would like to know if these videos are in any order ranking such as beginner at the top and expert down at the bottom? If not would there be any chance you could post a list with them somewhat grouped in their difficulty level, that would be a great help for others like myself who want to learn and improve as I go through all of these wonderful videos. Even if you don't have time to do something like that I still want to thank you for doing all of these and letting us see them for free.

    Regards,

    George

    ReplyDelete
  6. Hello everyone !
    My name is Tin and i come from VietNam . I'm studying Mechatronics engineering in HCMC university of technology. This blog is really great ! I have just watched your video tutorial on youtube :) .It is very nice and help me very much. Thank you for this blog . I want to learn more design on inventor . I am new to this software and would like to know.
    Thank for posting and sharing :))

    ReplyDelete
    Replies
    1. It is good to know that our videos are helping you in your learning process. Keep working hard you will certainly achieve success in your goal.

      Delete
  7. Hi, thank you very much for the videos. They are very educative and informative, and are of great help for our projects.
    I'm facing a difficulty in finding the worm and the worm gear assembly parts as mentioned in the video for Worm Gear Dynamic Simulation. Could you please help me it?

    ReplyDelete
    Replies
    1. Visit the following link to get the part file....
      http://nisheeth-inventortalks.blogspot.in/2011/07/worm-gear-dynamic-simulation-video.html

      Delete
  8. Hello I really like your videos, was making the video of the suspension fork, but can not find the way to make the fork brace ... could you please help me ... it is that I really wanted to finish this project . Thank you.

    ReplyDelete
    Replies
    1. You do not have to make that part just download it by visiting its page mentioned in this list.

      Delete
  9. May I download the ISO and ANSI nuts/washers/fasteners, for the Suspension Tutorial, from your blog anywhere?

    ReplyDelete
    Replies
    1. Yes you can click on the Suspension (Video Tutorial) Autodesk Inventor 2016 over the list present on this page and you will get the link to download all the parts required to complete the tutorial.

      Delete
    2. We cannot open the parts with Inventor 2015, correct?

      Delete
    3. Yes you can not open it with 2015 inventor. But you can download sample files of autodesk inventor of your version by visiting the following link... Suspension assembly is present there...
      https://knowledge.autodesk.com/support/inventor-products/downloads/caas/downloads/content/inventor-sample-files.html

      Delete
  10. i have a question !! how i get real dimensions of components......for example i need to make a suspensión and direction system, but i dont know how i get it.....thanks!!!!!!

    ReplyDelete
  11. i have a question !! how i get real dimensions of components......for example i need to make a suspensión and direction system, but i dont know how i get it.....thanks!!!!!!

    ReplyDelete
    Replies
    1. Watch the related video or download all the provided files of that video and then check its modeling history from the browser bar.

      Delete
    2. Sir! Thanks For your video i learn a lot, could you make a tutorial of inventor using its embedded simulation thank sir.

      Delete
  12. This is a nice post. Very good work. Just keep the standard and quality of your work going. Visit: 3D CAD Modelling

    ReplyDelete
  13. Hi Sir can you please provide link for ILOGIC and drawing automation

    ReplyDelete
  14. Visit the following blog link of ours.....
    http://nisheeth-inventortalks.blogspot.in/2013/07/ilogic-basic-autodesk-inventor-video.html

    ReplyDelete
  15. you rock!! thanks for the great youtube vids. i started inventor just a few months ago and have been able to get back to normal design speeds from when i was using a form of autocad 10yrs ago!!!

    ReplyDelete
  16. Hi Sir can i ask u for video how to create pinion when i need it to be part of shaft? thank you

    ReplyDelete
    Replies
    1. We have not created the pinion part shown in the video, it has been picked up from an assembly named Arbor Press which was provide by 'Autodesk Inventor' software as a sample file in the past. So to complete the tutorial, by just downloading it..

      Delete
  17. You are awesome buddy.......... Thanks alot for sharing such a nice tutorials:)

    ReplyDelete
  18. you have some great projects and I have my advance students go to your site if they are learning faster than the rest of the class. I am having trouble with getting one of my projects done, can you help? I am making a large clothes clip and when I make the assembly I can not get the spring to sit correctly because the spring will not expand as if it is under tension. Can you do a demo? I am willing to send files of what I have. my email is pl_tech@yahoo.com

    ReplyDelete
  19. Guys you are so excellent! appreciate Your Works.Thank you

    ReplyDelete
  20. Thanks for your contributions, do an excellent job

    ReplyDelete
  21. Nice blog, can you share the british standard whitworth (BSW) thread as autodesk inventor files?
    Thank you

    ReplyDelete
    Replies
    1. This comment has been removed by the author.

      Delete
    2. Visit following link....
      http://nisheeth-inventortalks.blogspot.in/2011/07/wood-screw-by-coil-tool-video-tutorial.html

      Delete
  22. Hello I am so delighted I located your blog, I really located you by mistake, while I was watching on google for something else, Anyways I am here now and could just like to say thank for a tremendous post and a all round entertaining website. Please do keep up the great work. solid carbide tools

    ReplyDelete
  23. Hello sir, can you post gear box dynamic simulation

    ReplyDelete
    Replies
    1. Sorry we have not created any video on this topic. So can not help in this regard. Buy there is a video on the same topic on link below..Check it if it works.
      https://www.youtube.com/watch?v=FpOecMieP4Y

      Delete
  24. Hi, I'm from Vietnam, 25 years old, graduated from Ho Chi Minh City Industrial University, I know your video through youtobe, it's really nice, thank you very much

    ReplyDelete
  25. Hi Sir, I find your channel very good for training and very simple to make step by step! Your it's a great great and hard work...in these days I'm studying Autodesk Inventor and I'm building the "MKII Engine", but in the assembly video I saw that I miss clutch gear 20t and 24t...Can you tell me how can I get them please? Do you have tutorials or do I have to build them?

    Thank you so much!!
    Daniele

    ReplyDelete
    Replies
    1. You can download the finished file by visiting the tutorial page. All components are provided it.

      Delete
  26. Thank you so much for the great videos, It has helped me so much and I cant thank you enough for the great work that you have done!

    ReplyDelete
  27. Dear Sir,
    Myself Sri Debjit Chandra, am an Intrutor of Engineering drawing and CAD/ CAM from West Bengal. I must admire your unseen before parametric modelling and virtual realities. Which are best in state-of-art that I have never seen. My warm wish for you. Also, I have a request from me and my students will you send us the orthographic part drawings of hand vice and the assembly view from which you have generated the solid modelling. You can send me at my email id :debjitchandra2007@gmail.com
    Hope, I shall be favoured from you.
    With regards,
    Debjit Chandra.

    ReplyDelete
  28. Sorry drawing sheets are not available for this or any other model.

    ReplyDelete